- Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
- Vario-Constamatic (VC)-Full wave electronics for working at impact rates to suit the application materials, and that remain almost constant even under load
- Thumbwheel for preselection of impact rate
- Electronic soft start for smooth start-up
- Restart protection: prevents unintentional start-up after power supply interruption
- Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
- Lockable switch for comfortable chiselling in continuous operation
- Service display, e.g. to indicate when the carbon brush needs to be replaced, and an LED indicating mains voltage
- Early warning system thanks to service LED for targeted planning of the carbon brush replacement 8 working hours before switching off
- The adjustable front handle can be rotated 360° and the angle adjusted for an optimum working position
Chipping hammer
MHE 5 (600148500) Chipping hammer
Article number: 600148500
Your Delivery Scope
(220-240 V / 50 - 60 Hz)
Plastic Carry Case
- 7.1 JMax. single blow energy (EPTA)
- 3000 bpmMaximum impact rate
- 1100 WRated input power
- SDS-maxTool holder
| Max. single blow energy (EPTA) | 7.1 J |
| Maximum impact rate | 3000 bpm |
| Rated input power | 1100 W |
| Tool holder | SDS-max |
| Weight (without power cable) | 5.7 |
| Cable length | 6 m / 19.685 ft m |
| Chiseling | 12.3 m/s² |
| Uncertainty of measurement K | 1.5 m/s² |
| Sound pressure level | 95 dB(A) |
| Sound power level (LwA) | 105 dB(A) |
| Uncertainty of measurement K | 1.67 dB(A) |
| Front handle |
| Lubricant for tool shank end |
| Duster |
| Plastic carry case |
Accessory
Categories 1
8 out of 8 possible accessories
17 variants
3 variants
